How to Use a Wet and Dry Floor Cleaner on Hard Floors
By Home & Kitchen Appliances – Morphy Richards UK | Published: 2026-10-22
Category: How-to Guides
Learn how to use a wet and dry floor cleaner on hard floors, including prep, washing, drying, and maintenance tips for best results.
Quick answer
To use a wet and dry floor cleaner on hard floors, start by clearing the area, fill the clean water tank, select the appropriate mode, and move the cleaner slowly over the floor to wash and dry in one pass.
Why a wet and dry floor cleaner beats a mop
A wet and dry floor cleaner combines washing and drying in a single pass, so you don't have to swap between a mop, bucket, and separate drying cloth. This saves time and reduces the risk of streaks or slippery residue.
Unlike a traditional mop that can push dirty water around, a wet and dry floor cleaner extracts the dirty solution directly into a separate tank, leaving floors cleaner and drier.
Know your machine's limitations
Not all wet and dry floor cleaners are suitable for every surface. Some are designed for sealed hard floors like tile, vinyl, or laminate, while others can also handle carpets with a dedicated carpet washer mode. Always check the manufacturer's guidance for your specific model.
If you own a model like the MRXCOMPLETEPRO, you can also use it as a carpet washer with the included solution, but for unsealed wood or delicate surfaces, test in an inconspicuous area first.
Step-by-step guide to using a wet and dry floor cleaner
- Prepare the area: Remove furniture, rugs, and any large debris from the floor. Sweep or vacuum to pick up loose dirt that could clog the cleaner. Check that no small objects like screws or pet toys are left behind, as they can damage the brush or suction.
- Fill the clean water tank: Fill the clean water tank with warm water and add the recommended floor cleaning solution, following the manufacturer's dilution ratio. Do not overfill. Use the correct amount of solution – too much can leave a sticky residue, and too little may not clean effectively.
- Select the right mode: Choose the appropriate mode for your floor type. For hard floors, use the hard floor mode; if your model has a carpet washer mode, switch to that for carpets. If you're unsure, start with the gentler mode and test on a small area.
- Wash and dry in one pass: Press the trigger to release the cleaning solution and move the cleaner slowly over the floor in overlapping passes. The machine will extract the dirty water and dry the floor as you go. Avoid going over the same spot repeatedly, as this can over-wet the floor.
- Empty and rinse the dirty water tank: After cleaning, empty the dirty water tank and rinse it thoroughly. Clean the brush and any filters according to the manufacturer's instructions. Leaving dirty water in the tank can cause odours and bacteria growth, so always empty it after each use.
Product facts
- MRXCOMPLETEPRO Wet and Dry Hard Floor Cleaner & 1L Carpet Washer Solution: The MRXCOMPLETEPRO Wet and Dry Hard Floor Cleaner offers up to 30 minutes of running time depending on the mode selected and comes with a free bottle of carpet cleaning solution. This means you can clean multiple rooms without stopping to recharge, and you can also tackle carpet stains and odours with the included solution.
MRXCOMPLETEPRO Wet and Dry Hard Floor Cleaner & 1L Carpet Washer Solution
